SmartThings Support

Danfoss Living Connect Thermostatic Radiator Valve (LC13)

Along with SmartThings, the Danfoss Living Connect Thermostatic Radiator Valve (LC13) can control and automate your home’s individual radiators. Monitor and regulate the warm water supply and compare detected temperatures to save energy and keep your home as cosy as can be!

  • SmartThings app
  • SmartThings Classic app

To connect the Danfoss Thermostatic Radiator Valve with the SmartThings Hub

In the SmartThings app:

  1. From the Home screen, touch the Plus (+) icon and select Add device
  2. Select Danfoss and touch Thermostat
  3. Choose a Hub for the device and touch Next
  4. Choose a Room for the device and touch Next
  5. While the Hub searches:
    1. Press the center button to wake the device
    2. Hold the center button for 3 seconds

 

To reset the Danfoss Thermostatic Radiator Valve

If the Danfoss Thermostatic Radiator Valve was not discovered, you may need to reset, or “exclude,” the device before it can successfully connect with the SmartThings Hub. To do this in the SmartThings app:

  1. From the Home screen, touch Menu (Menu icon), and select Devices
  2. Touch the Hub and select More Options (More Options menu icon)
  3. Touch Z-Wave utilities and select Z-Wave exclusion
  4. Press the center button to wake the device
  5. Hold the center button for 3 seconds

After the app indicates that the device was successfully removed from SmartThings, follow the first set of instructions above to connect the Danfoss Thermostatic Radiator Valve.

 

To connect the Danfoss Thermostatic Radiator Valve with the SmartThings Hub

In the SmartThings Classic app:

  1. Tap My Home
  2. Under Things, tap Add a Thing at the bottom of your Things list
  3. The app will say Looking for devices…
  4. While the Hub searches, press the middle button to “wake up” the device and then press and hold the middle button for 3 seconds (the pairing or “management” mode is indicated by ‘M’)
  5. When the device is discovered, it will be listed at the top of the screen
  6. Tap the device to rename it and tap Done
  7. When finished, tap Save
  8. Tap Ok to confirm

 

To reset the Danfoss Thermostatic Radiator Valve

If the Danfoss Thermostatic Radiator Valve was not discovered, you may need to reset, or “exclude,” the device before it can successfully connect with the SmartThings Hub. To do this in the SmartThings Classic app:

  1. Tap the menu (Android) / More (iOS)
  2. Tap the Hub
  3. Tap Z-Wave Utilities
  4. Tap General Device Exclusion
  5. Press the middle button to “wake up” the device and then press and hold the middle button for 3 seconds (the exclusion or “management” mode is indicated by ‘M’)

After the app indicates that the device was successfully removed from SmartThings, follow the first set of instructions above to connect the Danfoss Thermostatic Radiator Valve.

 

Attachments

File Size
z_wave_danfoss_lc_13_living_connect_radiator_thermostat_manual.pdf 1 MB

Get In Touch