SmartThings Support

Samsung Connect Panel

The Samsung Connect Panel is available on select Samsung Galaxy device and provides quick and easy access to monitor and control devices with a simple down swipe. 


Edit the Samsung Connect Panel

The Samsung Connect Panel is enabled by default, and it can be edited or disabled in the Samsung Connect app at any time. 

  1. Swipe down from the top of the screen
  2. Tap the icon Samsung_Connect_Panel_icon.png to the right of Samsung Connect
  3. On this screen, you can:
    • Toggle the switch at the top to OFF or ON to disable or enable the Samsung Connect Panel
    • Toggle the device switches to the OFF or ON state to hide or display the devices in the Samsung Connect Panel

If the Samsung Connect Panel has been disabled, it can be found within the Samsung Connect app: 

  1. Tap the three vertical dots in the top right
  2. Tap Settings
  3. Tap Samsung Connect Panel


View and actuate devices from Samsung Connect Panel

  1.  Swipe down from the top of the screen
  2. Below Samsung Connect, tap a device icon 
  3. In the dropdown that appears, you can:
    • View the displayed device status
    • Toggle the switch to actuate the device
      (Certain devices, such as a motion sensor, will not have an action to trigger)


Get In Touch