SmartThings Support

Schlage Camelot Touchscreen Deadbolt (BE469NX)

Few things put a damper on a vacation more than worry over whether you remembered to lock the front door behind you. But with the Schlage Touchscreen Deadbolt and SmartThings, you can check whether your door is locked or unlocked, lock or unlock it remotely, and set up automations for when the door should be secured—all from your phone.

The Schlage Touchscreen Deadbolt can also be opened manually via its sleek touchscreen. No need to fumble with your keys again. Set the deadbolt to automatically lock up when you leave for an added level of security and convenience.

Note: It is recommended to connect your lock with your SmartThings Hub before installing it on the door.




Connect the Schlage Touchscreen Deadbolt in the SmartThings app

Note: The Schlage Touchscreen Deadbolt is supported in the US.

In the SmartThings app:

  1. From the Home screen, touch the Plus (+) icon and select Device
  2. Select Schlage
  3. Touch Door Locks and Schlage Touchscreen
  4. Touch Start
  5. Choose a Hub for the device
  6. Choose a Room for the device and touch Next
  7. While the Hub searches:
    1. Press the Schlage button
    2. Enter 6 digit programming code
    3. Press 0


To reset the Schlage Touchscreen Deadbolt

If the Schlage Touchscreen Deadbolt was not detected, you may need to reset, or “exclude,” the device before it can successfully connect with the SmartThings Hub. To do this in the SmartThings app:

  1. From the Home screen, touch Menu (Menu icon), and select Devices
  2. Touch the Hub and select More Options (More Options menu icon)
  3. Touch Z-Wave utilities and select Z-Wave exclusion
  4. Press the Schlage button
  5. Enter 6 digit programming code
  6. Press 0

When the app indicates that the device was successfully removed from SmartThings, follow the instructions above to connect the Schlage Touchscreen Deadbolt.


File Size
Schlage Touchsreen Guide.pdf 6 MB