SmartThings Support

Samsung SmartThings Multi Sensor

The Samsung SmartThings Multipurpose Sensor truly does it all: This small ZigBee device acts as an open/closed, vibration, orientation, and temperature sensor all in one. As the most versatile device in the Samsung SmartThings family, the Multipurpose Sensor can send you an immediate alert if a door, window, or drawer opens unexpectedly, notify you if dangerous off-limits areas of your home have been accessed, and offer up-to-the-moment temperature readings.

With its built-in accelerometer, the Multipurpose Sensor can also monitor vibration. Place it on your washing machine to know when the laundry is finished, or attach it to your door to detect someone knocking. You can set it to trigger certain actions as well, like telling the thermostat to adjust when the temperature changes in the room.

Follow this link for information about the original SmartSense Multi Sensor.

 

How to connect the Samsung SmartThings Multipurpose Sensor to the SmartThings Hub

Follow the instructions below or consult the Multipurpose Sensor’s Quick-Start Guide at the bottom of this article.

In the SmartThings mobile app:

  1. Tap My Home
  2. Under Things, tap Add a Thing at the bottom of your Things list
  3. The app will say Looking for devices…
  4. While the Hub searches, move the Multipurpose Sensor within 15 feet of the Hub and pull the REMOVE TO PAIR tab on the sensor
  5. When the device is discovered, it will be listed at the top of the screen
  6. Tap the device to rename it and tap Done
  7. When finished, tap Save
  8. Tap Ok to confirm

 

Watch this video demonstration to see how to connect the SmartThings Multipurpose Sensor:

 

How to reset the Samsung SmartThings Multipurpose Sensor

If the Samsung SmartThings Multipurpose Sensor didn't connect to the Hub when you removed the pull-tab, reset and connect the device manually.

First:

  1. Press the push-tabs on either side of the Multipurpose Sensor to remove the cover
  2. Carefully remove the CR2450 battery using a flat tool

Next, put the Hub in join mode:

  1. Tap My Home
  2. Under Things, tap Add a Thing at the bottom of your Things list
  3. The app will say Looking for devices…

Last, while the Hub searches:

  1. Move the Multipurpose Sensor within 15 feet of Hub
  2. Hold down the Connect button on the Multipurpose Sensor while reinserting the battery
  3. Release the button when the LED is lit
  4. The LED will blink blue while attempting to connect
  5. Once the app shows a device has been found, put the cover back on the Multipurpose Sensor
  6. Follow the configuration steps above

Watch this video demonstration to see how to reset the SmartThings Multipurpose Sensor:

 

How to remove the Multipurpose Sensor from SmartThings

If the Multipurpose Sensor is not performing as expected, you may need to reset the device and/or remove and reconnect the device with the SmartThings Hub.

To remove the device via the SmartThings app:

  1. Tap My Home
  2. Tap Things
  3. Select the Multipurpose Sensor
  4. Tap the gear icon
  5. Tap Remove
  6. Confirm removal (this cannot be undone)

 

Technical Details

  • Dimensions: Sensor: 1.90 x 1.35 x 0.57 inches, 48 x 34 x 14 mm, Magnet: 1.50 x 0.54 x 0.53 inches, 38 x 14 x 13 mm
  • Weight: 0.04 lb, 0.69 oz
  • Operating Temperature: 32 to 104°F, 0 to 40°C (indoor only)
  • Power Source: CR2450 battery (included)
  • Mounting Hardware: Wall mounting bracket (1), 3M 1-inch square adhesive strips (x2), #5 Phillips-head mounting screws (x2)
  • Communication Protocol: ZigBee
  • Warranty: Find warranty information here
  • Range: 50-130 feet (depending on your home's construction)

 

Get In Touch

Reach us by phone
1-800 SAMSUNG
1-800-726-7864
9 am to 6 pm Pacific Time, Monday through Saturday
Reach us on live chat
9 am to 5 pm Pacific Time, Monday through Saturday
Powered by Zendesk