SmartThings Support

SmartThings Motion Sensor (previous generations)

Note: This article is for previous generations of the SmartThings Motion Sensor. If you have the newest version, you can find steps for your device here. If you're unsure about which version of the SmartThings Motion Sensor you own, click here.

The SmartThings Motion Sensor is a Zigbee device that lets you know when movement is detected in your home, and it can trigger different actions in response to that movement. Tell lights to turn on and off as you come and go, or set your personal theme music to play when you enter a room. You can also protect your home by triggering lights, sirens, and other electronics to turn on if there's unexpected motion. The SmartThings Motion Sensor detects motion up to 15 feet away with a 120-degree field of view.

The sensor can also detect temperature and trigger smart thermostats, window AC units, and portable heaters to automatically adjust. Place the Motion Sensor on a table or shelf, or use the included adhesive and magnetic mounting bracket to place it on a wall. You can also attach the Motion Sensor to metal walls and appliances using the magnetic back cover.

 

 

How to connect the SmartThings Motion Sensor in the SmartThings app

Note: In order to use the SmartThings app to control the SmartThings Motion Sensor, a SmartThings Hub or compatible device that Works as a SmartThings Hub is required.

In the SmartThings app:

  1. From the Home screen, touch the Plus (+) icon and select Device
  2. Select SmartThings, touch Motion sensor, and then Motion Sensor (STS-IRM & Others)
  3. Touch Start
  4. Choose a Hub for the device
  5. Choose a Room for the device and touch Next
  6. While the Hub searches, pull the battery tab

 

How to reset the SmartThings Motion Sensor

If the SmartThings Motion Sensor didn't connect to the Hub when you removed the pull-tab, reset and connect the device manually.

  • If the product sticker on the back says “Samsung SmartThings”:
    1. Remove the cover
    2. Hold the connect button for five (5) seconds
    3. Release the button when the LED starts blinking red
  • If the product sticker on the back does not say “Samsung SmartThings":
    • If the device has one cell battery (CR2450):
      1. Remove the battery
      2. Hold the button while reinserting the battery
      3. Release the button when the LED lights up
    • If the device has two AAAA batteries:
      1. Hold the button until the LED turns off (about 6 seconds)

 

Attachments

File Size
Motion_Booklet_2015_US.pdf 2 MB