SmartThings Support

How to connect Lutron Caséta devices

This article will tell you how to connect the following Lutron Caséta devices with SmartThings:

Note: The Lutron Caséta Shade is supported in the SmartThings Classic app.

For more information about compatibility, product details, and technical specifications, visit our Works With SmartThings page here.

 

  • SmartThings app
  • SmartThings Classic app

Connect a Lutron Caséta devices in the SmartThings app

Connect additional Lutron Caséta devices

Use and configure the Lutron Caséta within SmartThings

Remove Lutron Caséta devices from SmartThings

 

Connect a Lutron Caséta device in the SmartThings app

 

1. Set up a Lutron account

Download and install the Lutron app for iOS or Android, and then create a Lutron account.

 

2. Set up the Lutron Caséta Smart Bridge and devices

Follow Lutron’s in-app instructions to connect the Lutron Caséta Smart Bridge and the Lutron Caséta devices.

Note: The Lutron Caséta Smart Bridge cannot connect via Wi-Fi and must be hardwired to your network.

 

3. Connect Lutron Caséta through the SmartThings app

In the SmartThings mobile app:

  1. From the Dashboard, tap Add device
  2. Android: Tap Add Device Manually
  3. For outlets:
    1. Select Outlet
    2. Tap Lutron Caséta
  4. For switches:
    1. Select Switch/dimmer
    2. Tap Lutron Caséta
  5. Tap Click to enter Lutron credentials
  6. Enter your Lutron credentials (email address and password) and tap Sign In
  7. Tap Authorize
  8. Tap Done
  9. Wait a moment for SmartThings to discover your Lutron devices
  10. Tap Select devices to add (# found)
  11. Select your device(s) and tap Done
  12. Tap Done to complete setup

 

Connect additional Lutron Caséta devices

Tip: If you previously connected a Lutron Caséta with SmartThings and later install another device, follow these steps to set up the new device with SmartThings:

  1. From the Dashboard, tap Add device
  2. Android: Tap Add Device Manually
  3. For outlets:
    1. Select Outlet
    2. Tap
  4. For switches:
    1. Select Switch/dimmer
    2. Tap
  5. Tap Click to enter Lutron credentials
  6. Enter your Lutron credentials (email address and password) and tap Sign In
  7. Tap Authorize
  8. Tap Done
  9. Wait a moment for SmartThings to discover your Lutron devices
    Note: You will see the name of your previously added device(s)
  10. Tap Select devices to add (# found)
  11. Select your device(s) and tap Done
  12. Tap Done to complete setup

 

Use and configure the Lutron Caséta within SmartThings

Access your device from the Things view within the SmartThings mobile app:

  1. Tap Devices
  2. Tap the device

 

You can also control your Lutron Caséta device with Automations, such as turning on a light when motion is detected. Click here to learn more about Automations in the SmartThings app.

 

Remove the Lutron Caséta from SmartThings

If the Lutron Caséta is connected but not operating as normal, you may need to remove and reconnect the device in order for it to successfully integrate with your SmartThings setup.

To remove the device from the SmartThings mobile app:

  1. From the Dashboard, tap on the Devices tab
  2. Tap the three dots in the top right
  3. Tap Edit
  4. Tap the red minus icon (-) next to the name of the device
  5. Confirm removal (this cannot be undone)

 

Connect a Lutron Caséta devices in the SmartThings Classic app

Connect additional Lutron Caséta devices

Use and configure the Lutron Caséta within SmartThings Classic

Remove Lutron Caséta devices from SmartThings Classic

 

Connect a Lutron Caséta device in the SmartThings Classic app

 

1. Set up a Lutron account

Download and install the Lutron app for iOS or Android, and then create a Lutron account.

 

2. Set up the Lutron Caséta Smart Bridge and devices

Follow Lutron’s in-app instructions to connect the Lutron Caséta Smart Bridge and the Lutron Caséta devices.

Note: The Lutron Caséta Smart Bridge cannot connect via Wi-Fi and must be hardwired to your network.

 

3. Connect Lutron Caséta through the SmartThings Classic app

In the SmartThings Classic mobile app:

  1. Tap Marketplace
  2. Under Things, tap Outlets for the Plug-In Dimmer, Switches & Dimmers for the in-wall switches and dimmer, or Blinds & Shades for the Shade.
    Note: You only need to navigate through one of these to connect all of your Lutron Caséta devices at once
  3. Tap Connect Now
  4. Tap the field Lutron Login
  5. Enter your Lutron credentials (email address and password) and tap Sign In
  6. Tap Authorize
  7. Tap Done
  8. Wait a moment for SmartThings to discover your Lutron devices
  9. Tap Select devices to add (# found)
  10. Select your device(s) and tap Done
  11. Tap Done to complete setup

 

Connect additional Lutron Caséta devices

Tip: If you previously connected a Lutron Caséta with SmartThings and later install another device, follow these steps to set up the new device with SmartThings:

  1. Tap Marketplace
  2. Under Things, tap Outlets for the Plug-In Dimmer, Switches & Dimmers for the in-wall switches and dimmer, or Blinds & Shades for the Shade.
  3. Tap Connect Now
  4. Tap the field Lutron Login
  5. Enter your Lutron credentials (email address and password) and tap Sign In
  6. Tap Authorize
  7. Tap Done
  8. Wait a moment for SmartThings to discover your Lutron devices
    Note: You will see the name of your previously added device(s)
  9. Tap Select devices to add (# found)
  10. Select your device(s) and tap Done
  11. Tap Done to complete setup

 

Use and configure the Lutron Caséta within SmartThings Classic

Access your device from the Things view within the SmartThings Classic mobile app:

  1. Tap My Home
  2. Tap Things
  3. Tap the device

 

You can also automate your Lutron Caséta with SmartApps, such as turning on a light when motion is detected. To install related SmartApps:

  1. Tap Marketplace
  2. Tap SmartApps
  3. Tap Lights & Switches to install “Smart Lights”
  4. Choose the SmartApp and follow its on-screen installation instructions

 

Remove the Lutron Caséta from SmartThings Classic

If the Lutron Caséta is connected but not operating as normal, you may need to remove and reconnect the device in order for it to successfully integrate with your SmartThings setup.

To remove the device from the SmartThings Classic mobile app:

  1. Tap My Home
  2. Tap Things
  3. Tap the device
  4. Tap the gear icon
  5. Tap Edit Device
  6. Tap Remove
  7. Confirm removal (this cannot be undone)

Or remove the Lutron Caséta (Connect) SmartApp to disconnect all of your Lutron Caséta devices:

  1. Tap Automations
  2. Tap SmartApps
  3. Tap Lutron Caséta (Connect)
  4. Tap Remove
  5. Confirm removal

 

Attachments

File Size
QuickStartCasetaInwallDimmerUS.pdf 800 KB
QuickStartCasetaPluginLampdimmerKitUS.pdf 300 KB
Caseta Advanced Instructions.pdf 5 MB

Get In Touch