SmartThings Support

Leviton Omnistat2 Thermostat

The Leviton Omnistat2 is a programmable thermostat perfect for taking control of climate of your home–from wherever you are! Save energy when you’re away and stay cozy when you’re home. Forgot to change the thermostat setting? It’s no problem with SmartThings and the Leviton Omnistat2 Thermostat!

leviton_omnistat2_thermostat_en-us.jpg

This article will tell you how to connect the following Leviton Omnistat2 Thermostats with the SmartThings Hub:

 

To connect the Leviton Omnistat2 Thermostat with the SmartThings Hub

In the SmartThings mobile app:

  1. Tap My Home
  2. Under Things, tap Add a Thing at the bottom of your Things list
  3. The app will say Looking for devices…
  4. While the Hub searches:
    1. On the thermostat, press down on the scroll wheel once
    2. Scroll to Setup and press down
    3. Scroll to Installation Settings and press down
      You may see a warning about changing installation settings–press Continue
    4. Scroll to ZigBee Setup and press down
    5. Press the button below Enroll
  5. When the device is discovered, it will be listed at the top of the screen
  6. Tap the device to rename it and tap Done
  7. When finished, tap Save
  8. Tap Ok to confirm

 

To reset the Leviton Omnistat2 Thermostat

If the Leviton Omnistat2 Thermostat is not performing as expected, you may need to reset the device and/or remove and reconnect the device with the SmartThings Hub.

To remove the device via the SmartThings app:

  1. Tap My Home
  2. Tap Things
  3. Select the device
  4. Tap the gear icon
  5. Tap Remove
  6. Confirm removal (this cannot be undone)

 

Once removed through the app, the thermostat should automatically leave the ZigBee network. If the device does not automatically leave the network, “Enroll” will not appear as an option in the ZigBee Setup, and you must manually command the thermostat to leave the network.

To physically reset the device:

  1. On the thermostat, press down on the scroll wheel once
  2. Scroll to Setup and press down
  3. Scroll to Installation Settings and press down
  4. Scroll to ZigBee Setup and press down
  5. Press the button below Disband

 

Once reset, the Leviton Omnistat2 Thermostat is then ready to be connected with the SmartThings Hub. Follow the first set of instructions above to connect the Leviton Omnistat2 Thermostat.

 

Get In Touch

Reach us by phone
1-800 SAMSUNG
1-800-726-7864
9 am to 6 pm Pacific Time, Monday through Saturday
Reach us on live chat
9 am to 5 pm Pacific Time, Monday through Saturday
Powered by Zendesk