With Leviton and SmartThings, you can trigger your lights automatically with a schedule and when motion is detected and much more, including when you give a voice command to a smart assistant like Alexa or the Google Assistant!
This article will tell you how to connect the following Leviton devices:
- Leviton Decora Smart Wi-Fi 600W Dimmer (DW6HD-1BZ)
- Leviton Decora Smart Wi-Fi 1000W Dimmer (DW1KD-1BZ)
- Leviton Decora Smart Wi-Fi 15A Switch (DW15S-1BZ)
- Leviton Decora Smart Wi-Fi Plug-in Outlet (DW15A-1BW)
- Leviton Decora Smart Wi-Fi Plug-in Dimmer (DW3HL-1BW)
Note: If you have a Leviton ZigBee device, follow these instructions for how to connect a Leviton ZigBee device. If you have a Leviton Z-Wave device, follow these instructions for how to connect a Leviton Z-Wave device. Consult the documentation that came with your device if you’re unsure which communication protocol it uses (ZigBee or Z-Wave).
For more information about compatibility, detailed product information, and technical specifications, visit our products page here.
- SmartThings app
- SmartThings Classic app
To connect the Leviton Wi-Fi device in the SmartThings app
First, download the Leviton app for Android or iOS and install the Leviton device according to its installation instructions.
Next, in the SmartThings mobile app:
- From the Dashboard, tap Add device
- Android: Tap Add Device Manually
- Select Outlet
- Tap Leviton Decora
- Tap Click here to enter Leviton credentials
- Enter your Leviton account email address and password
- Tap Link Your Account
- Tap Done
- Wait a moment for SmartThings to discover your Leviton devices
- Tap Select devices to add (# found)
- Select your device(s) and tap Done
- Tap Done
This completes the setup and your Leviton Wi-Fi devices are ready to be used with SmartThings!
Connect additional Leviton Wi-Fi devices
Tip: If you previously connected Leviton Wi-Fi devices with SmartThings and later install additional devices, follow these steps to set up the new devices with SmartThings:
- From the Dashboard, tap Add device
- Android: Tap Add Device Manually
- Select Outlet
- Tap Leviton Decora
- You will see your previously added devices. Wait a moment for SmartThings to discover your new Leviton devices
- Tap Select devices to add (# found)
- Select your device(s) and tap Done
- Tap Done
Remove the Leviton Wi-Fi device from SmartThings
If the Leviton Wi-Fi device is connected but not operating as normal, you may need to remove and reconnect the device in order for it to successfully integrate with your SmartThings setup.
To remove the device from the SmartThings mobile app:
- From the Dashboard, tap on the Devices tab
- Tap the three dots in the top right
- Tap Edit
- Tap the red minus icon (-) next to the name of the device
- Confirm removal (this cannot be undone)
To connect the Leviton Wi-Fi device in the SmartThings Classic app
First, download the Leviton app for Android or iOS and install the Leviton device according to its installation instructions.
Next, in the SmartThings Classic app:
- Tap Marketplace
- Under Things, tap Switches & Dimmers
- Select your Leviton Wi-Fi device
- Tap Connect Now
- Tap Leviton Login
- Enter your Leviton account email address and password
- Tap Link Your Account
- Tap Done
- Wait a moment for SmartThings to discover your Leviton devices
- Tap Select devices to add (# found)
- Select your device(s) and tap Done
- Tap Done
This completes the setup and your Leviton Wi-Fi devices are ready to be used with SmartThings!
Connect additional Leviton Wi-Fi devices
Tip: If you previously connected Leviton Wi-Fi devices with SmartThings and later install additional devices, follow these steps to set up the new devices with SmartThings:
- Tap Marketplace
- Under Things, tap Switches & Dimmers
- Select your Leviton Wi-Fi device
- Tap Connect Now
- You will see your previously added devices. Wait a moment for SmartThings to discover your new Leviton devices
- Tap Select devices to add (# found)
- Select your device(s) and tap Done
- Tap Done
Remove the Leviton Wi-Fi device from SmartThings Classic
If the Leviton Wi-Fi device is connected but not operating as normal, you may need to remove and reconnect the device in order for it to successfully integrate with your SmartThings setup.
To remove the device from the SmartThings Classic app:
- Tap My Home
- Tap Things
- Tap the device
- Tap the gear icon
- Tap Edit Device
- Tap Remove
- Confirm removal (this cannot be undone)
Or remove the Leviton Decora (Connect) SmartApp to disconnect all of your Leviton Wi-Fi devices:
- Tap Automations
- Tap SmartApps
- Tap Leviton Decora (Connect)
- Tap Remove
- Confirm removal (this cannot be undone)
Attachments
| File | Size |
|---|---|
| Leviton-DW3HL.pdf | 200 KB |
| Leviton-DW1KD.pdf | 200 KB |
| Leviton-DW15A.pdf | 200 KB |
| Leviton-DW15S.pdf | 300 KB |
| Leviton-DW6HD.pdf | 300 KB |