SmartThings Support

Schlage Camelot and Century Touchscreen Deadbolts (BE469NX)

Few things put a damper on a vacation more than worry over whether you remembered to lock the front door behind you. But with the Schlage Touchscreen Deadbolt and SmartThings, you can check whether your door is locked or unlocked, lock or unlock it remotely, and set up automations for when the door should be secured—all from your phone.

The Schlage Touchscreen Deadbolt can also be opened manually via its sleek touchscreen. No need to fumble with your keys again. Set the deadbolt to automatically lock up when you leave for an added level of security and convenience.

Note: It is recommended to connect your lock with your SmartThings Hub before installing it on the door.

 

 

This article will tell you how to connect the following Schlage Touchscreen Deadbolts with the SmartThings Hub:

 

  • SmartThings app
  • SmartThings Classic app

Connect the Schlage Touchscreen Deadbolt in the SmartThings app

Note: The Schlage Touchscreen Deadbolt is supported in the US.

In the SmartThings mobile app:

  1. From the Dashboard, tap Add device
  2. Android: Tap Add Device Manually
  3. Select Lock
  4. Tap Schlage Touchscreen
  5. If you have more than one SmartThings Hub connected, select the Location you would like to add the device to, then tap Done
  6. While the Hub searches, bring the lock within 10 feet of the Hub, then:
    1. Press the Schlage button on the lock
    2. Enter your 6-digit programming code
    3. Press 0
  7. When the device is discovered, a message will appear that the device was successfully connected to your SmartThings Hub
  8. Tap Edit to rename the device
  9. When finished, tap Done
  10. Tap Done again to confirm

 

To reset the Schlage Touchscreen Deadbolt

If the Schlage Touchscreen Deadbolt was not discovered, you may need to reset, or “exclude,” the device before it can successfully connect with the SmartThings Hub. To do this in the SmartThings mobile app:

  1. From the Dashboard, tap on the Devices tab
  2. Tap the Hub
  3. Tap the three dots in the top right
  4. Tap Z-Wave exclusion
  5. When prompted, follow the lock’s removal process:
    1. Press the Schlage button on the lock
    2. Enter your 6-digit programming code
    3. Press 0

After the app indicates that the device was successfully removed from SmartThings, follow the first set of instructions above to connect the Schlage Touchscreen Deadbolt.

 

To remove the Schlage Touchscreen Deadbolt from SmartThings

If the Schlage Touchscreen Deadbolt is connected but not operating as normal, you may need to remove the device and reconnect it with the SmartThings Hub.

To remove the device via the SmartThings app:

  1. From the Dashboard, tap on the Devices tab
  2. Tap the three dots in the top right
  3. Tap Edit
  4. Tap the red minus icon (-) next to the name of the device
  5. Confirm removal (this cannot be undone)
  6. When prompted, perform the exclusion procedure to remove the device from the mobile app and from the SmartThings Hub

 

For technical specifications and product details, visit our Works With SmartThings page here.

 

Connect the Schlage Touchscreen Deadbolt in the SmartThings Classic app

In the SmartThings Classic mobile app:

  1. Tap My Home
  2. Under Things, tap Add a Thing at the bottom of your Things list
  3. The app will say Looking for devices…
  4. While the Hub searches, bring the lock within 10 feet of the Hub, then:
    1. Press the Schlage button on the lock
    2. Enter your 6-digit programming code
    3. Press 0
  5. When the device is discovered, it will be listed at the top of the screen
  6. Tap the device to rename it and tap Done
  7. When finished, tap Save
  8. Tap Ok to confirm

 

To reset the Schlage Touchscreen Deadbolt

If the Schlage Touchscreen Deadbolt was not discovered, you may need to reset, or “exclude,” the device before it can successfully connect with the SmartThings Hub. To do this in the SmartThings Classic mobile app:

  1. Tap the menu (Android) / More (iOS)
  2. Tap the Hub
  3. Tap Z-Wave Utilities
  4. Tap General Device Exclusion
  5. When prompted, follow the lock’s removal process:
    1. Press the Schlage button on the lock
    2. Enter your 6-digit programming code
    3. Press 0

After the app indicates that the device was successfully removed from SmartThings, follow the first set of instructions above to connect the Schlage Touchscreen Deadbolt.

 

To remove the Schlage Touchscreen Deadbolt from SmartThings Classic

If the Schlage Touchscreen Deadbolt is connected but not operating as normal, you may need to remove the device and reconnect it with the SmartThings Hub.

To remove the device via the SmartThings Classic app:

  1. Tap My Home
  2. Tap Things
  3. Select the device
  4. Tap the gear icon
  5. Tap Remove
  6. Confirm removal
  7. When prompted, perform the exclusion procedure to remove the device from the mobile app and from the SmartThings Hub

 

For technical specifications and product details, visit our Works With SmartThings page here.

 

Attachments

File Size
Schlage Touchsreen Guide.pdf 6 MB

Get In Touch