SmartThings Support

Schlage Keypad Lock with Lever Handle (FE599NX)

The Schlage Keypad Lock with Lever Handle/Schlage Lever Door Lock (FE599NX) is a Z-Wave door lock. When integrated with the SmartThings platform, the lock can be used to remotely lock and unlock the door to your home. Combine the lock with a mobile presence sensor to automatically lock the front door as you head to work. Or with the touch of a button, let your kids into the house when they come home from school, even when you're still at the office.

The Schlage Keypad Lock with Lever Handle makes an excellent addition to the SmartThings family and is perfect for both home security and convenience.

 

 

To connect a Schlage Keypad Lock with Lever Handle to the SmartThings Hub

In the SmartThings mobile app:

  1. Tap My Home
  2. Under Things, tap Add a Thing at the bottom of your Things list
  3. The app will say Looking for devices…
  4. While the Hub searches, bring the lock within 10 feet of the Hub, then:
    1. Enter your 6-digit programming code
    2. Wait for the device to beep three times
    3. Press the Schlage button
    4. Press 0
    5. The Schlage button will blink three times to confirm
  5. When the device is discovered, it will be listed at the top of the screen
  6. Tap the device to rename it and tap Done
  7. When finished, tap Save
  8. Tap Ok to confirm

 

To reset the Schlage Keypad Lock with Lever Handle

If the lock was not discovered, you may need to reset, or “exclude,” the device before it can successfully connect with the SmartThings Hub. To do this in the SmartThings mobile app:

  1. Tap the menu (Android) / More (iOS)
  2. Tap the Hub
  3. Tap Z-Wave Utilities
  4. Tap General Device Exclusion
  5. When prompted, follow the lock’s removal process:
    1. Enter your 6-digit programming code
    2. Wait for the device to beep three times
    3. Press the Schlage button
    4. Press 0
    5. The Schlage button will blink three times to confirm

After the app indicates that the device was successfully removed from SmartThings, follow the first set of instructions above to connect the lock.

 

To remove the Schlage Keypad Lock with Lever Handle from SmartThings

If the Schlage Keypad Lock with Lever Handle is connected but not operating as normal, you may need to remove the device and reconnect it with the SmartThings Hub.

To remove the device via the SmartThings app:

  1. Tap My Home
  2. Tap Things
  3. Select the device
  4. Tap the gear icon
  5. Tap Remove
  6. Confirm removal
  7. When prompted, perform the exclusion procedure to remove the device from the mobile app and from the SmartThings Hub

 

For technical specifications and product details, visit our Works With SmartThings page here.

 

Get In Touch