SmartThings Support

SmartAlert Siren

To connect the SmartAlert Siren with the SmartThings Hub

Prepare the SmartAlert Siren:

  1. Install the included 9V battery, and/or connect the siren to an AC power source

Then, from the SmartThings mobile app:

  1. Tap My Home
  2. Under Things, tap Add a Thing at the bottom of your Things list
  3. The app will say Looking for devices…
  4. While the Hub searches, press the black Program button on the bottom of the siren once
  5. When the device is discovered, it will be listed at the top of the screen
  6. Tap the device to rename it and tap Done
  7. When finished, tap Save
  8. Tap Ok to confirm

 

To reset the SmartAlert Siren

If the SmartAlert Siren was not discovered, you may need to reset, or “exclude,” the device before it can successfully connect with the SmartThings Hub. To do this in the SmartThings mobile app:

  1. Tap the menu (Android) / More (iOS)
  2. Tap the Hub
  3. Tap Z-Wave Utilities
  4. Tap General Device Exclusion
  5. When prompted, press the black Program button on the bottom of the siren once

After the app indicates that the device was successfully removed from SmartThings, follow the first set of instructions above to connect the siren.

 

To remove the SmartAlert Siren from SmartThings

If the SmartAlert Siren is connected but not operating as normal, you may need to remove the device and reconnect it with the SmartThings Hub.

To remove the device via the SmartThings app:

  1. Tap My Home
  2. Tap Things
  3. Select the device
  4. Tap the gear icon
  5. Tap Remove
  6. Confirm removal
  7. When prompted, perform the exclusion procedure to remove the device from the mobile app and from the SmartThings Hub

 

Meet the SmartAlert Siren

 

Get In Touch

Reach us by phone
1-800 SAMSUNG
1-800-726-7864
9 am to 6 pm Pacific Time, Monday through Saturday
Reach us on live chat
9 am to 5 pm Pacific Time, Monday through Saturday
Powered by Zendesk