SmartThings Support

Springs Window Fashions Motorized Window Treatments

With the power of SmartThings, your motorized window treatments can be conveniently controlled remotely using your smartphone. They can also be pre-programmed to automatically raise and lower based on the time of day - a great way to save on energy costs and keep your home secure!

The following models can be connected to the SmartThings Hub:

  • RSZ1
  • CSZ1

 

  • SmartThings app
  • SmartThings Classic app

Connect the Springs Window Fashions Motorized Window Treatment with the SmartThings Hub

Connect the window treatment to SmartThings:

Note: SmartThings cannot add a window treatment if it is already associated with a remote.

  1. From the Home screen, touch the Plus (+) icon and select Add device
  2. Select Springs Window Fashions
  3. Choose a Hub for the device and touch Next
  4. Choose a Room for the device and touch Next
  5. While the Hub searches, use these steps to connect the window treatments and remote
    • Hold the program button on the window treatment for three (3) seconds
    • Hold the program button on the remote for three (3) seconds

Associate the remote with the window treatment

On the remote, press and hold the programming button until the LED flashes green

  1. On the window treatment, press and hold the programming button until the LED begins flashing green
  2. Both devices LEDs will turn solid green to indicate a successful association

That's it! You can now begin controlling your Window Treatment using the SmartThings app and through SmartThings Automations.

 

 

 

Reset the Springs Window Fashions Motorized Window Treatment

If the Springs Window Fashions Motorized Window Treatment was not discovered, you may need to reset, or “exclude,” the device before it can successfully connect with the SmartThings Hub. To do this in the SmartThings app:

  1. From the Home screen, touch Menu (Menu icon), and select Devices
  2. Touch the Hub and select More Options (More Options menu icon)
  3. Touch Z-Wave utilities and select Z-Wave exclusion
  4. When prompted, use these steps to exclude the window treatments and remote
    • Hold the program button on the window treatment for three (3) seconds
    • Hold the program button on the remote for three (3) seconds

After the app indicates that the device was successfully removed from SmartThings, follow the instructions above to connect the Springs Window Fashions Motorized Window Treatment.

  

Connect the window treatment to SmartThings

In the SmartThings Classic app:
  1. Touch My Home
  2. Under Things, tap Add a Thing at the bottom of your Things list
  3. The app will say Looking for devices…
  4. While the Hub searches, use these steps to connect the window treatments and remote
    • Hold the program button on the window treatment for three (3) seconds
    • Hold the program button on the remote for three (3) seconds
  5. When the device is discovered, it will be listed at the top of the screen
  6. Touch the device to rename it and tap Done
  7. When finished, tap Save
  8. Tap Ok to confirm

 

Connect the remote to SmartThings:

Note: The remote will not be added as a standalone device in the SmartThings app.

  1. Touch My Home
  2. Under Things, tap Add a Thing at the bottom of your Things list
  3. The app will say Looking for devices…
  4. On the remote, press and hold the programming button for 3 seconds until the LED flashes green
  5. When the device is discovered, a message will appear that the device was successfully connected to your SmartThings Hub
  6. When finished, tap Save
  7. Touch Ok to confirm

 

Associate the remote with the window treatment again:

  1. On the remote, press and hold the programming button until the LED flashes green
  2. On the window treatment, press and hold the programming button until the LED begins flashing green
  3. Both devices LEDs will turn solid green to indicate a successful association

That's it! You can now begin controlling your Window Treatment using the SmartThings Classic app and through SmartThings Classic Routines.

Note: If the app says that your Springs Window Fashions Motorized Window Treatment is offline, it may still be controllable. This is an issue that we are actively looking into.

 

Reset the Springs Window Fashions Motorized Window Treatment

If the Springs Window Fashions Motorized Window Treatment was not discovered, you may need to reset, or “exclude,” the device before it can successfully connect with the SmartThings Hub. To do this in the SmartThings app:

  1. Touch the menu (Android) / More (iOS)
  2. Touch the Hub
  3. Touch Z-Wave Utilities
  4. Touch General Device Exclusion
  5. While the Hub searches, use these steps to connect the window treatments and remote
    • Hold the program button on the window treatment for three (3) seconds
    • Hold the program button on the remote for three (3) seconds

After the app indicates that the device was successfully removed from SmartThings, follow the first set of instructions above to connect the Springs Window Fashions Motorized Window Treatment.

 

Attachments

File Size
177492_MotorizationManual - SWF Motor Site.pdf 1 MB