SmartThings Support

SmartSense Presence 센서

The SmartSense Presence Sensor is a keychain-sized ZigBee device that tracks the comings and goings of loved ones, pets, cars—anything that can carry it. The SmartSense Presence Sensor will register when it is moved in and out of range of the SmartThings Hub. This means you can receive notifications and do all sorts of other things based on the sensor's location.

Place the SmartSense Presence Sensor in your car to receive alerts when the vehicle leaves or returns. Put it on a pet’s collar to get notified if he ventures away from the yard (bad dog!) or goes on a walk with the dog walker. Automatically turn on the lights when you enter your house, or turn off the TV when you leave. Although the SmartSense Presence Sensor can be used outside, it should not be exposed to moisture.

참고: 새로운 Samsung SmartThings Arrival 센서 는 SmartSense Presence 센서와 기능적으로 동일합니다.

 

Meet The SmartThings SmartSense Presence Sensor

 

 

How to connect the SmartSense Presence Sensor to the SmartThings Hub

Follow the instructions below or consult the Presence Sensor’s Quick-Start Guide at the bottom of this article. 

SmartThings 모바일 앱에서 다음을 수행합니다. 

  1. Marketplace(스토어)를 누릅니다.
  2. Connect New Device(새 기기 연결)를 누릅니다.
  3. 앱이 I’m looking for your new Things(새 연결기기 찾는 중)… 라는 메시지와 함께 회전하는 원을 표시합니다.
  4. While the Hub is searching, move the SmartSense Presence Sensor within 15 feet of the Hub and pull the REMOVE TO PAIR tab on the sensor
  5. 기기가 발견될 때마다 # Things Found(발견된 연결기기 수)! 메시지가 증가하고 기기가 아래에 나열됩니다.
  6. 기기를 누른 후 구성합니다.
  7. 기기를 눌러서 이름을 지정합니다.
  8. You have the option to add the sensor to a Room. Since Rooms group devices based on their physical locations, you may choose to skip this step for the SmartSense Presence Sensor
  9. Next(다음)를 누릅니다.
  10. 앱 내 지시에 따라 기기를 구성합니다.
  11. 기기 구성을 마쳤으면 Done(완료)을 누릅니다.

 

How to reset the SmartSense Presence Sensor

If the SmartSense Presence Sensor didn't connect to the Hub when you removed the pull-tab, reset and connect the device manually.

우선 다음과 같이 합니다. 

  1. Insert a small flathead screwdriver into the groove at the base of the SmartSense Presence Sensor
  2. 드라이버를 가볍게 비틉니다. 플라스틱 케이스가 열립니다.
  3. LED 조명이 꺼질 때까지 센서의 Connect(연결) 버튼을 누른 다음(약 6초) 놓습니다. 

그 다음, Hub를 연결 모드로 전환합니다.

  1. Marketplace(스토어)를 누릅니다.
  2. Connect New Device(새 기기 연결)를 누릅니다.
  3. 앱이 I’m looking for new Things(새 연결기기 찾는 중)… 라는 메시지와 함께 회전하는 원을 표시합니다. 

마지막으로, Hub가 검색을 하는 동안 다음을 수행합니다.

  1. Move the SmartSense Presence Sensor within 15 feet of Hub
  2. Press and quickly release the Connect button on the SmartSense Presence Sensor
  3. Once the app shows a device has been found, put the cover back on the SmartSense Presence Sensor
  4. 위의 구성 단계를 따릅니다.

If you need help connecting or resetting your SSmartSense Presence Sensor, please send an email to support@smartthings.com or contact us through live chat.

 

 

기술 정보

  • Communication Protocol: ZigBee
  • Dimensions: 3" x 2.2" x 1.8”
  • Weight: 2.4 ounces
  • Power Source: 1 CR2032 battery (included)
  • Range: 30-50 feet (depending on your home’s construction)

 

Get In Touch

Reach us by phone
1-800 SAMSUNG
1-800-726-7864
9 am to 6 pm Pacific Time, Monday through Saturday
Reach us on live chat
9 am to 5 pm Pacific Time, Monday through Saturday
Zendesk 제공